TRIPUS safety switch 230V IP44 – restart protection for circular saws, milling machines & planing benches

Bosch Hammer Drill Robust Line Set, SDS-plus-5, 5 pieces, 5 - 10 mmHammer drill Robust Line-Set SDS-plus-5, 5 pieces. Diameter: 5 / 6 mm, working length: 50 mm, total length: 115 mm, diameter: 6 / 8 / 10 mm, working length: 100 / 100 / 100, total length: 165 / 165 / 165 mm , set size: 197 x 87.5 x 23 mm. With activeteq. Diameter: Less than or equal to 10mm active center point for active cutting in concrete. Durable carbide for good life and durability. With wear indicator and 4-spiral turbo design: Patented 4-spiral design to efficiently remove the drilling dust. 2 cutters. AWB Brazing and Hardening Diameter optimized brazing and hardening technology to increase drill bit robustness and reduce vibration while drilling. Serrated Carbide: Channels dust directly into the spiral to prevent clogging with debris at the bottom of the hole. The visibility of the wear indicator gives an orientation regarding the tolerance to be able to set dowels. Suitable for masonry, concrete and reinforced concrete. Suitable for all rotary hammers with SDS-plus holder.

Product Description • Drill assortment roll-up bag ”SP” 13 pieces• Bit box 32 pieces• Jigsaw blade assortment-SP 10 piecesPromotional accessory set 55 piecesConsisting of: •Drill assortment roll-up case “SP” 13 pieces•Bit box 32 pieces•Jigsaw blade assortment SP 10 pieces

Tripus 555.199 Zero-Voltage Switch: The zero-voltage switch for your safety The Tripus 555.199 zero-voltage switch is an essential safety component for your power tools. As an essential flush-mounted switch with undervoltage release, it reliably protects you and your work environment from the dangers of an uncontrolled restart after a power outage. Ideal for a wide range of applications, from the workshop to the construction site. It was specially developed for motors, concrete mixers, woodworking machines, and many other devices that must not restart automatically after a power drop. Its robust construction, simple snap-in installation, and the Made in Germany quality seal make it the first choice for professional tradespeople and quality-conscious DIY enthusiasts. Safety and Efficiency – Convincing Features Zero-voltage release: Protection against accidental start-up The main advantage of this switch is its zero-voltage release. In the event of a voltage drop or power failure, the power supply to the machine is immediately interrupted. Even when power is restored, the machine remains off. It must first be manually restarted, which prevents accidents caused by suddenly restarting equipment. Snap-In Installation: Quick and Easy Installing this switch is child's play thanks to the snap-in system. It snaps securely into the standardized installation opening of approx. 46.5 × 22.2 mm without screws. This saves valuable time during initial installation and when replacing old switches. Robust construction and IP65 protection The front of the switch is rated IP65, making it dustproof and protected against water jets. Combined with the durable PVC buttons, it is ideal for use in demanding environments such as workshops, garages, or construction sites. Your benefits at a glance Prevents accidents: Reliably protects against uncontrolled restarts of your machine. Saves time during installation: The "snap-in" system enables quick, tool-free installation. Durable and robust: Thanks to IP65 protection and high-quality materials. Versatile application: Ideal for a wide range of power tools and machines. High load capacity: Designed for 230 V / 16 A (AC-1) and 230 V / 14.5 A (AC-3). Quality "Made in Germany": Manufactured according to the highest German standards. Certified safety: With VDE and UL approval. FAQ – Frequently Asked Questions What is the difference from a switch with an external coil? In this model (without a coil), the coil is not freely wirable. It is permanently connected to the switch's contact block, simplifying installation. Both switches offer the same high safety standard of zero-voltage tripping. What is the difference between AC-1 and AC-3? AC-1 refers to the switching capacity of pure resistive loads (e.g., heaters), while AC-3 stands for inductive loads (e.g., motors). The specified load capacity for AC-3 is lower due to the higher starting current for motors. What does the identifier 555.199 mean? The article number 555.199 is the official Tripus product designation for this specific zero-voltage switch. It serves to uniquely identify the product. Technical Data Model: Tripus 555.199 Description: Zero-voltage switch without external coil Switching function: 0 - 1 (On-Off) Contacts: 2 NO contacts Voltage: Rated operating voltage Uc 230 V / 50 Hz Switching capacity: AC-1: 230 V / 16 A, AC-3: 230 V / 14.5 A Connectors: 6.3 × 0.8 mm flat plug connectors; Optional coil connection (A1) 2.8 × 0.8 mm Dimensions (L × W × D): approx. 57 × 54 × 60 mm Weight: approx. 90 g Mounting: "Snap-In" Installation opening: approx. 46.5 × 22.2 mm Protection class (front): IP 65 Approvals: VDE, UL GTIN / EAN: 4250318200166 Maximum safety for your tools – One click for more protection! Protect yourself and your machines with the reliable zero-voltage switch from Tripus. Order Tripus switches now!

Tripus 555.109 Zero-Voltage Switch: The zero-voltage switch for your safety The Tripus 555.109 zero-voltage switch is an essential safety component for your power tools. As an essential flush-mounted switch with zero-voltage release, it reliably protects you and your work environment from the dangers of an uncontrolled restart after a power outage. Ideal for a wide range of applications, from the workshop to the construction site. It was specially developed for motors, concrete mixers, woodworking machines, and many other devices that must not restart automatically after a power outage. Its robust construction, simple snap-in installation, and "Made in Germany" quality make it the first choice for professional tradespeople and quality-conscious DIY enthusiasts. Safety and Efficiency – Convincing Features Zero-voltage release: Protection against accidental start-up The main advantage of this switch is its zero-voltage release. In the event of a voltage drop or power failure, the power supply to the machine is immediately interrupted. Even when power is restored, the machine remains off. It must first be manually restarted, which prevents accidents caused by suddenly starting equipment. Extended coil: Greater application flexibility Unlike other models, the Tripus 555.109 offers an extended coil with an additional 2.8 x 0.8 mm flat-pin terminal (A1). This special feature allows the coil to be controlled separately from the main current paths. This is particularly advantageous when the switch is used in more complex circuits or in combination with other external control elements such as emergency stop buttons or external relays. Robust construction and IP65 protection The front of the switch is rated IP65, making it dustproof and protected against water jets. Combined with the durable PVC buttons, it is ideal for use in demanding environments such as workshops, garages, or construction sites. Your benefits at a glance Prevents accidents: Reliably protects against uncontrolled restarts of your machine. Flexible connection: The integrated coil enables separate control and more complex circuits. Saves time during installation: The "snap-in" system enables quick, tool-free installation. Durable and robust: Thanks to IP65 protection and high-quality materials. Versatile application: Ideal for a wide range of power tools and machines. High load capacity: Designed for 230 V / 16 A (AC-1) and 230 V / 14.5 A (AC-3). Quality "Made in Germany": Manufactured according to the highest German standards. Certified safety: With VDE and UL approval. FAQ – Frequently Asked Questions What is the difference from the switch without an external coil (Art. 555.199)? The Tripus 555.109 features a detachable coil with a separate flat-pin terminal (A1). This allows the coil to be controlled via an external switching contact (e.g., an emergency stop button or a key switch). In the 555.199 model, the coil is permanently integrated into the switch and cannot be controlled separately. Both models offer the same high safety standard of zero-voltage tripping. What does the article number 555.109 stand for? The article number 555.109 is the official Tripus product designation for this specific zero-voltage switch. It serves to uniquely identify the product. What is the difference between AC-1 and AC-3? AC-1 refers to the switching capacity of purely resistive loads (e.g., heating elements), while AC-3 stands for inductive loads (e.g., motors). The specified switching capacity for AC-3 is lower due to the higher starting current in motors. Technical Data Model: Tripus 555.109 Description: Zero-voltage switch with external coil Switching function: 0 - 1 (On-Off) Contacts: 2 NO contacts Voltage: Rated operating voltage Uc 230 V / 50 Hz Switching capacity AC-1: 230 V / 16 A AC-3 switching capacity: 230 V / 14.5 A Connections: 6.3 × 0.8 mm flat-pin terminals Optional coil connection (A1): 2.8 × 0.8 mm flat-pin terminals Dimensions (L × W × D): approx. 57 × 54 × 60 mm Weight: approx. 90 g Mounting: Snap-in Installation opening: approx. 46.5 × 22.2 mm Protection class (front): IP 65 GTIN / EAN: 4250318200173 Maximum safety for your tools – One click for more protection! Protect yourself and your machines with the reliable zero-voltage switch from Tripus. Order Tripus switch now!

Tripus wheel chock with logo & TÜV: Reliable safety for your vehicle  For all vehicle owners who prioritize safety and stability, we present the Tripus wheel chock with Tripus logo. This indispensable tool is specially designed to effectively prevent your trailer, caravan, motorhome, or car from rolling away. Its robust construction offers a reliable solution to avoid potential accidents and give you peace of mind on every journey. Tested quality for maximum safety The Tripus wheel chock is not just an ordinary accessory, but a product that meets the highest quality and safety standards. It has been comprehensively TÜV tested and certified, which officially confirms its reliability. This wedge is designed for axle loads of up to 1,600 kg and a maximum wheel load of 800 kg, providing a solid foundation for securing a wide variety of vehicles. Trust in German engineering and thorough TÜV testing, which gives you additional peace of mind. Robust, lightweight, and versatile Made of high-quality and durable polyamide (plastic), the Tripus wheel chock is characterized by its exceptional combination of lightness and stability. These properties make it the ideal companion in all conditions, whether on sloping terrain, uneven surfaces, or when securing a vehicle while stationary. Its versatility is further underlined by its ability to safely support tires with a radius of up to 295 mm. Each piece of this essential accessory comes with the distinctive Tripus logo – a sign of quality and trust. Product details at a glance: Maximum axle load: 1,600 kg Maximum wheel load: 800 kg Material: High-quality polyamide (durable plastic) Manufacturer: German manufacturer (Tripus) Certification: TÜV-tested Function: Prevents accidents caused by unintentional rolling away of the trailer in accordance with §41 StVZO (German Road Traffic Licensing Regulations) Features: Lightweight and stable Scope of delivery: Contains 1 wheel chock (without bracket) Color: Black Your safety is important to us: FAQ Is the wheel chock suitable for my vehicle? The Tripus wheel chock is designed for vehicles with an axle load of up to 1,600 kg and a maximum wheel load of 800 kg. It can support tires with a radius of up to 295 mm. Please check your vehicle's specifications to ensure compatibility. Why is a TÜV-tested wheel chock important? The TÜV test confirms that the wheel chock meets the relevant safety standards and quality requirements. This gives you the peace of mind that you are using a reliable product that has been tested and found to be safe. conditions and contributes to compliance with legal regulations (e.g., §41 StVZO). Do I need to check the wheel chock before every trip? Yes, it is strongly recommended to check the tightness and correct position of the wheel chock before every trip. This is a simple, but crucial step to ensure a carefree and safe driving experience. Safety Tips for Using Your Wheel Chock Proper Use for Maximum Effect Always Use: Always use wheel chocks when your vehicle (especially a trailer or motorhome) is parked for an extended period of time or on a slope, even if the parking brake is applied. Both sides: For optimal safety, especially with heavier vehicles or steep inclines, it is advisable to use a wheel chock on both wheels of an axle or on the diagonally opposite wheels. Solid surface: Ensure that the surface on which the chock is placed is firm and stable to prevent slipping. Note the direction: Always place the chock in the direction of travel where it is likely to roll – i.e., downhill on the wheel facing the slope. Regular inspection: Regularly check the condition of your wheel chocks for damage. Invest in your safety now! Order your Tripus wheel chock today and enjoy peace of mind on every journey. Don't forget: One small step for great safety. Order now and travel safely!

Tripus Wedge Holder with Logo & TÜV: Secure Storage for Your Vehicle Safety For the discerning vehicle owner who wants to keep their wheel chock safe and within reach at all times, we present the Tripus Wedge Holder with Tripus Logo. This specially designed holder is essential for securing your wheel chock firmly to your vehicle, trailer, or RV. Its patented, TÜV-tested design offers a simple yet highly effective solution for maximum stability and safety. --- Certified Quality for Reliable Hold Safety is paramount when transporting or parking vehicles. The Tripus Wedge Holder ensures that your wheel chock stays firmly in place. Thanks to its robust, single-piece construction from high-quality polyamide (nylon), it delivers dependable performance in all conditions. TÜV certification confirms its quality and safety, so you can fully rely on your vehicle safety setup. --- Easy Handling and Versatile Use The Tripus Wedge Holder is not only extremely sturdy but also very user-friendly. It allows effortless insertion and removal of the wheel chock, saving you time and effort. Whether you want to mount it on your trailer, caravan, van, or in your garage, its versatile applications make it the ideal companion for anyone who values organization and quick access to their safety equipment. Your wheel chock will always be within easy reach when needed. --- Product Details at a Glance: Item Name: Tripus Wedge Holder Material: High-quality polyamide (durable plastic) Manufacturer: German Manufacturer (Tripus) Certification: TÜV-approved Design: Patented, single-piece design Features: Robust, long-lasting, weather- and UV-resistant Compatibility: Fits Tripus wheel chocks up to 1600kg axle load Package Contents: Includes 1 holder (wheel chock not included) Color: White --- Your Questions Answered: FAQ Which wheel chocks is this holder suitable for? This Tripus holder is specifically designed for Tripus wheel chocks, particularly models like the Tripus Wheel Chock for axle loads up to 1600kg (EAN 4250318280007 and 4250318280014), ensuring an optimal and secure fit. Is installation difficult? No, installation is very straightforward. The holder is a single-piece system that can be quickly and easily mounted wherever needed (e.g., vehicle chassis, wall) using screws. Screws are not included, as the type required depends on the mounting surface. Is the holder weather-resistant? Yes, it is built to withstand outdoor conditions and resist UV exposure, ensuring long-lasting performance even in challenging weather.

Tripus Wheel Chock Holder with Logo & TÜV: Secure Attachment for Your Vehicle Security For the discerning vehicle owner who wants to keep their wheel chocks safely and within easy reach, we present the Tripus Wheel Chock Holder with Tripus Logo. This specially designed bracket is the essential accessory for securely securing your wheel chock to your vehicle, trailer, or motorhome. Its patented and TÜV-tested design offers a simple yet effective solution for maximum stability and safety. Tested quality for a reliable hold Safety is of utmost importance when transporting and parking vehicles. The Tripus Holder ensures that your wheel chock stays firmly and securely in its intended place. Thanks to its robust and durable one-piece construction made of high-quality plastic (polyamide), it offers reliable performance under all conditions. TÜV testing confirms its quality and safety, so you can fully rely on the stability of your vehicle's security. Easy to use and versatile application The Tripus holder is not only extremely stable, but also incredibly easy to use. It allows for effortless locking and removal of the wheel chock, saving you time and effort. Whether you want to mount the holder on your trailer, caravan, van, or in the garage – its versatile application possibilities make it the ideal companion for anyone who values order and quick accessibility of their securing accessories. This way, you always have the wheel chock at hand when needed. Product details at a glance: Item name: Tripus wheel chock holder Material: High-quality polyamide (durable plastic) Manufacturer: German manufacturer (Tripus) Certification: TÜV-tested Design: Patented, one-piece design Features: Robust, durable, weather- and UV-resistant Compatibility: Suitable for Tripus wheel chocks up to 1600 kg axle load Scope of delivery: Contains 1 bracket (without wheel chock) Color: Black Your questions, our answers: FAQ For which wheel chocks is this holder suitable? This Tripus holder is specially designed for Tripus wheel chocks, especially for models such as the Tripus wheel chock for axle loads up to 1600 kg (EAN 4250318280007 and 4250318280014), to ensure optimal and secure support. Is installation difficult? No, installation is very easy. The mount is designed as a one-piece system that can be quickly and easily attached to the desired location (e.g., vehicle chassis, wall) with screws. Screws are not included, as the type required depends on the mounting surface. Is the holder weatherproof? Yes, the Tripus holder is made of high-quality polyamide plastic that is both weather- and UV-resistant. It retains its stability and appearance even with prolonged exposure to the elements. Tips for installation and use Optimal Placement and Maintenance Ideal Mounting Position: Mount the holder in an easily accessible location on the vehicle or in the garage, where the wheel chock can be quickly removed and reinserted. Correct Screw Selection: Select the appropriate screws and anchors for the respective mounting surface to ensure a secure hold. Regular Inspection: Occasionally check that the holder and wheel chock are securely fastened, especially after long journeys over uneven terrain. Easy Maintenance: The plastic holder is easy to maintain. A simple cleaning with water and, if necessary, mild soap is enough to keep it clean. Invest in order and safety! With the Tripus Holder for Wheel Chocks, you'll always have your most important safety accessories neatly stored and quickly at hand. Order now and get organized!

Ei Electronics Ei650 Smoke Alarm – 10-Year Battery, VdS-Tested, Reliable Fire ProtectionThe Ei Electronics Ei650 smoke alarm provides the highest level of security in your home. With its built-in 10-year lithium battery and quality-tested according to VdS standards, it reliably protects you and your family from the danger of fire. Thanks to modern sensor technology, it reacts early to smoke development and warns with a loud, clear alarm tone.Maximum security for your homeEquipped with the latest photoelectric sensor technology, the Ei650 reliably detects even the smallest smoke particles. The built-in lithium battery guarantees an operating life of up to 10 years – without the need for a battery change.Certified QualityThe smoke alarm is VdS-tested and complies with the DIN EN 14604 standard. It not only offers reliable smoke detection, but is also particularly low-maintenance and user-friendly.Technical DetailsModel: Ei Electronics Ei650EAN / GTIN: 5099383004618Power supply: Built-in lithium battery (10-year lifespan)Sensor: Photoelectric / opticalCertification: VdS-tested, DIN EN 14604Alarm volume: approx. 85 dB(A) at 3 metersMaintenance: Self-test function, low maintenanceArea of application: Bedrooms, hallways, living areasFAQ – Frequently Asked Questions Does the battery need to be changed?No, the built-in lithium battery lasts up to 10 years and does not need to be replaced. How loud is the alarm?The alarm sounds at a volume of approximately 85 dB(A) at a distance of 3 meters – loud enough to reliably wake you up. Where should the smoke alarm be installed?For optimal protection, we recommend installing the alarm on the ceiling of bedrooms, hallways, and common areas.Protect what matters most to you – with the Ei Electronics Ei650 smoke alarm.Easy to install, low-maintenance, and exceptionally reliable – now with tested quality for 10 years of safety without battery changes. Order now and increase security

Tripus TP3251-71: Zero-voltage switch with coil design – Maximum safety in the event of a power failure The Tripus TP3251-71 zero-voltage switch is an indispensable safety element for Your power tools and machines. It was specially designed to ensure maximum accident prevention by effectively preventing the automatic restart of devices after a power failure or voltage drop. This model features a extended coil (UC 230V/50Hz) and is ideal as a reliable replacement switch or for new installation in applications with increased safety requirements. Thanks to its robust construction, IP 65 protection rating, and simple snap-in installation, this machine circuit breaker is the perfect solution for harsh environments. It is frequently used in equipment such as concrete mixers, drills, cut-off machines, and other motor-driven tools. Quality by Tripus guarantees compliance with the highest standards (VDE 0660, DIN EN 60947). Safety Features & Benefits: Your Machine Protection Switch Reliable Undervoltage Release (NVS) The core of the TP3251 is protection against uncontrolled restart. If the voltage drops, the power supply is immediately interrupted. The switch remains in the "off" position and must be manually operated after the power supply is restored. This optimally protects the operator from injury. High load capacity and protection class IP 65 With a conventional thermal current of 16 A and a switching capacity of 230 V / 16 A (AC-1), this flush-mounted switch is extremely powerful. The IP 65 protection class guarantees protection against dust deposits and splash water – essential for tough construction site or workshop use. Easy installation thanks to Snap-In The "snap-in" mounting in the installation opening (approx. 46.5 \ 22.2\ mm) enables quick and secure installation. The flat seal provides the necessary protection against moisture on the installation surface. The main connections are made via 6.3 x 0.8 mm flat plug connectors. Your benefits at a glance: Securityfor your power tools Maximum work safety: Prevents automatic restart after a power failure (NVS function). Universal use: Perfect as a spare switch for concrete mixers, drills, and various motors. High degree of protection: IP 65 against splash water and dust – ideal for workshops and construction sites. Quick installation: Convenient and secure snap-in fastening. Version with coil: Rated operating voltage UC = 230V / 50Hz. Quality and standards: Made in Europe by Tripus, compliant with VDE 0660 and DIN EN 60947. Technical Details: Tripus TP3251-71 Product Type: Zero-Voltage Switch / Machine Protection Switch Manufacturer/Model: Tripus TP3251-71 Switching Function: 0 - 1 (ON/OFF) Contacts: 2 NO contacts Rated Current: 16 A Switching Capacity AC-1 (230V): 16 A AC-3 (230V) switching capacity: 14.5 A Operating voltage (UC): 230V / 50Hz (with coil) Connections: 6.3 / 0.8 mm flat plug terminals Installation type: Snap-in (installation opening approx. 46.5 / 22.2 mm) Front protection class: IP 65 Material / Color: PA / Black GTIN/EAN: 4250318201286 Protect your equipment and employees with the original Tripus switch! Rely on the Tripus TP3251-71 – the standard for machine safety. Order now and work safely!

The OBO Bettermann damp room junction box offers you a reliable solution for electrical installation in damp environments. With its dimensions of 80x43x34mm and robust construction, it is ideally suited to safely protect electrical connections and junctions in damp areas. The junction box is equipped with a high-quality RF design that ensures high resistance to interference from high-frequency signals. This makes it ideal for use in environments where RF interference may occur. With a total of 6 entries, the junction box offers sufficient space for connecting cables and wires. The entries are carefully sealed to prevent the ingress of moisture and dirt. This ensures that the junction box has a high protection class against moisture and dust in accordance with the applicable standards. The junction box is available in white (RAL-9010) and blends harmoniously into any environment. The white surface also ensures good visibility and facilitates installation and maintenance. The OBO Bettermann damp room junction box meets high quality standards and is designed for long-term use. It is ideal for use in areas such as bathrooms, basements, garages or other damp environments where safe electrical distribution must be guaranteed. Order the OBO Bettermann damp room junction box 80x43x34mm A 6 HF RW [2000005] now and benefit from a reliable, high-quality solution for your electrical installations in damp environments.

Maximum safety for your lawnmower: TRIPUS dead man's switch (250V/16A, IP44)Ensure maximum safety when mowing the lawn with the TRIPUS dead man's switch. This high-quality switch is specially designed to prevent accidents and give you peace of mind while gardening.Why the TRIPUS dead man's switch is essential: Increased safety: The dead man's switch stops the lawnmower immediately when the handle is released. This prevents dangerous situations, especially in the event of falls or unexpected events. Robust construction: With an IP44 protection rating, the switch is protected against splash water and dust. This guarantees a long service life and reliable operation, even under harsh conditions. High Performance: The switch is designed for a voltage of 250V and a current of 16A, making it suitable for most standard lawn mowers. Easy Installation: The TRIPUS dead man's switch is easy to install, making it an ideal replacement for defective or outdated switches. Durability: This switch is designed to withstand the rigors of regular use and offers reliable performance for years. Technical Details: Voltage: 250V Current: 16A Protection Class: IP44 EAN: 4250318215023 Increase safety while mowing the lawn! Order the TRIPUS dead man's switch now and ensure a worry-free gardening experience. Only while supplies last.